Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 26
With the instrument configured for RS485, connection can be made to the DB-9
connector, labeled “RS232/485”, or to the three “COM” pins on the “General I/O”
connector. See Section 8.2 for additional details.
4.5.5.3. Ethernet Connection
With the instrument configured for Ethernet, connection should be made to the RJ-45
port labeled “Ethernet.” Connection can be made using a standard Category 5 or better
network patch cable. T-API can provide an appropriate cable, please see the spare parts
list in Appendix A. See Section 8.2 for additional details.