WSHP-PRC001-EN 21
Building Control Advantages
The Tracer ZN510/ZN524 controller has the ability to share information with one
or several units on the same communication link. This sharing of information is
made possibe via a twisted pair of wire and a building automation system or
through Trane’s Rover
TM
service tool .
An advantage of installing a ZN510/ZN524 is its capability to work with other Lon-
Talk certified controllers. This provides greater flexibility to the building owner,
as well as greater flexibility in design.
Integrating the ZN510/ZN524 on water-source equipment, and tying it to a Tracer
Summit system provides a complete building management system. Each Tracer
Summit can connect to a maximum of 120 controllers. With the ICS system, the
Tracer can initiate an alarm on a loss of performance on equipment malfunctions;
allowing problems to be handled in a timely manner before compromising com-
fort.
This type of application would most commonly be used for a large space(s) that
may require more than one unit. In addition to
this application design, the Tracer
ZN510/ZN524 controller provides
a way for units located within the
same space to share the same
zone sensor to prevent units from
simultaneously heating and
cooling in the same space.See
Figure 30 for Tracer ZN510/ZN524
controller system.
Features and Benefits
ZN510 & ZN524 Controls
Figure 30: Tracer ZN510/ZN524 controller system