Filter
Top Products
UNLOCK
STATIONS
To "Unlock" the
station(s),
first
press
the MENU
key,
then
press
the
key
adjacent
to the
"Change Setup"
label. Now
press
the
key
adjacent
to
the "More" label until the "Unlock Stations" menu
appears.
Press the
key
next to that label. The screen
shown below
appears.
C
Select Stations
to Unlock
nC
lean
lEnten
Simply press
the
key
next to the station or stations that
you
wish to
unlock,
then
press
the
key
next to the "Enter label. The Z-9500 wilt
return to the last-used loran
screen. The stations
you
selected are
now
locked on to the
current
cycle.
Remember,
turning
the
unit
off,
resetting
the
unit,
or
entering
a
new CR1 or initial
position
erases all
cycle Jumps
and locks.
TENTHS
The Z-9500 has the
capability
to show all
digital
numbers in tenths. In
other
words,
it can
display
the
depth
in tenths of a
foot, speed
in
tenths
of a mile
per
hour,
etc. Tenths for all functions
are turned on or off with
a menu selection.
To
change
tenths,
press
the MENU
key.
Next, press
the
key adjacent
to the "More" label. Then
press
the
key adjacent
to the
"Digital Display
"label.
Next,
press
the
key
next to the "Tenths" label. The screen
shown below
appears.
Press the
key corresponding
to the desired
label. The screen
will clear and return to the sonar screen with the
digital
numbers
displayed
in the desired manner.
SPEED FILTER
The
speed
constant is the amount of
filtering
done
by
the receiver.
There are three
levels:
light,
medium,
and
heavy.
If
you
select
light,
the
amount of
"jitter"
shown on the
plotter
and
navigation displays
will
increase,
however this will also
give you
the fastest
updates.
Conse-
quently,
medium and
heavy gives
less
jitter
and slower
update
times.
The receiver will default to the medium mode. To
change
the
speed
constant,
press
the MENU
key,
then
press
the
key adjacent
to the
"Change Setup"
label. Now
press
the
key
next to the "More" label unitil
the
"Speed
Filter' label
appears.
Press the
key
next to that label. The
screen shown at the
top
of
the next
page appears. Simply press
the
____________
key
next
to the
desired
speed
filter. The Z-9500 returns to the last-used
loran screen
using
the
speed
constant
you
selected.
100
37
SMALL
DIGITS
46FT
0
H 32°OO.03'
1J79°59.98'
16
32
20
192 KHZ
Select Function
Tenths D
isp.
On
Tenths
Disp.
Of £
I
I
(
Clear I
PDF compression, OCR, web-optimization with CVISION's PdfCompressor