Filter
Top Products
Now
simply press
the
key(s) adjacent
to the
waypoint
number that
you
wish to
assign
the
position.
For
example,
if
you
want to
assign
the
position
at the
top
of the screen to
waypoint
number
one, press
the
key
next to the "1"
label,
then
press
the
key
next to the "Enter label. U
you
wish to save the
position
under
waypoint
nunter
30, press
the
key
next
to the
"3",
then "0" and
finally,
"Enter. After
pressing
the last
key,
the
Z-9500 returns to the loran
screen,
saving
the
position
under the
waypoint
number
you specified.
GO TO WAYPOINT
The Z-9500
gives you
the
option
of
entering
a
position,
then
going
to the
position
without
saving
it. To do
this,
first
press
the
Waypoint
Save
key.
Next,
enter a
position using
the "New
Waypoint
Position" method. After
entering
the
position, press
the
key
next to the "More" label until the
screen shown below
appears.
Z-9500
LORAN
OPERATION
(REQUIRES
OPTIONAL ELC-1 LORAN
MODULE)
Saue
IJaypoint:
IJiEtypoint
a
1
I
Now
press
the
key adjacent
to the "Go to
Waypoint"
label. The Z-9500
returns to the loran
display showing navigation
data to the
position you
entered.
WAYPOINT
RECALL
You
must recall a
waypoint
to use the
Steering
or
Navigation
screens.
To recall a
waypoint,
first
press Waypoint
Recall
key.
The menu shown
at
the
top
of the next
page appears.
If
you already
know the
waypoint
number
you
wish to use as a destina-
tion,
press
the
key
next to the "Dest.
Waypt.
Num"
label.
If
not, press
the
key
next to the "View/Go To
Waypt"
label.
101
:40965.60
102:85920.22
N 32°0O.45'
W 83°11.33'
WARNING!
USE THIS LORAN RECEIVER
ONLY AS AN AID TO
NAVIGATION. A CAREFUL NAVIGATOR SHOULD
NEVER RELY ON ONLY ONE METHOD TO OBTAIN
POSITION
INFORMATION.
NOTICE!
MAKE CERTAIN THE LORAN IS DISPLAYING
ThE
CORRECT
POSITION IN LATITUDE/LONGITUDE
COORDINATES BEFORE
NAVIGATING WITH THIS UNIT.
THE POSITION MUST BE CORRECT FOR
THE
NAVIGATION FEATURES TO WORK PROPERLY.
84
53
PDF compression, OCR, web-optimization with CVISION's PdfCompressor