Filter
Top Products
LF-Series Flowmeters: Sensor/Transmitter Installation 1
Installing the Sensor Installing the DIN TransmitterInstalling the FM TransmitterBefore You Begin
Chapter 1
Before You Begin
1.1 Overview
This chapter provides an orientation to the use of this manual. This manual describes the procedures
required to install the following components:
• All LF-Series sensors
• All LF-Series field-mount transmitters
• All LF-Series DIN rail mount transmitters
If you do not know what sensor or transmitter you have, see Section 1.6 for instructions on identifying
the component type from the part number on the tag.
1.2 Safety
Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
WARNING
Improper installation in a hazardous area can cause an explosion.
For information about hazardous applications, refer to Micro Motion approvals
documentation, shipped with the transmitter or available from the Micro Motion web
site.
WARNING
Hazardous voltage can cause severe injury or death.
Make sure power is disconnected before installing transmitter.
CAUTION
Improper installation could cause measurement error or flowmeter failure.
Follow all instructions to ensure transmitter will operate correctly.