2 LF-Series Flowmeters: Sensor/Transmitter Installation
Before You Begin
1.3 Flowmeter components
The LF-Series flowmeter includes the following components:
• One of the following LF-Series sensors:
-LF2M
-LF3M
-LF4M
• One of the following LF-Series transmitters:
- LF-Series field-mount transmitter with the 1 mA/1 FO outputs option board (flow-only)
- LF-Series field-mount transmitter with the 1 mA/1 FO outputs option board
(multivariable)
- LF-Series field-mount transmitter with the 2 mA/1 FO outputs option board
(multivariable, configurable)
- LF-Series field-mount transmitter with the F
OUNDATION
™
fieldbus outputs option board
- LF-Series field-mount transmitter with the Profibus-PA outputs option board
- LF-Series DIN rail mount transmitter with the 1 mA/1 FO outputs option board
(flow-only)
- LF-Series DIN rail mount transmitter with the 2 mA/1 FO outputs option board
(multivariable, configurable)
To identify your sensor and transmitter type, see Section 1.6.
1.4 Transmitter codes used in this manual
In this manual, codes are used to identify specific LF-Series transmitter types. The codes are listed in
Table 1-1.
Table 1-1 Transmitter codes
Transmitter type Code
LF-Series field-mount transmitter with the 1 mA/1 FO outputs option board (flow-only or
multivariable)
FM AN
LF-Series field-mount transmitter with the 2 mA/1 FO outputs option board (multivariable,
configurable)
FM CIO
LF-Series field-mount transmitter with the F
OUNDATION fieldbus outputs option board FM FB
LF-Series field-mount transmitter with the Profibus-PA outputs option board FM PA
LF-Series DIN rail mount transmitter with the 1 mA/1 FO outputs option board (flow-only) DIN AN
LF-Series DIN rail mount transmitter with the 2 mA/1 FO outputs option board (multivariable,
configurable)
DIN CIO