Filter
Top Products
LF-Series Flowmeters: Sensor/Transmitter Installation 3
Before You Begin
Installing the Sensor Installing the DIN TransmitterInstalling the FM TransmitterBefore You Begin
1.5 Installation procedures
To install the LF-Series flowmeter, the following procedures are required:
• Install the sensor (all models) – see Chapter 2
• Install the transmitter
- LF-Series field-mount transmitters – see Chapter 3
- LF-Series DIN rail mount transmitters – see Chapter 4
• Wire the transmitter to the sensor – see Chapter 5
• Wire the transmitter outputs or connect the communication wires:
- LF Series FM AN transmitters – see Chapter 6
- LF-Series FM CIO transmitters – see Chapter 7
- LF-Series FM FB or PA transmitters – see Chapter 8
- LF-Series DIN AN transmitters – see Chapter 9
- LF-Series DIN CIO transmitters – see Chapter 10
1.6 LF-Series model numbers
The LF-Series sensor model number has the following form:
LFxMxxxxxxxxxxx
The first four characters identify the sensor model.
The LF-Series transmitter model number has the following form:
LFTxxxxxxxx
where the fourth character identifies the transmitter type:
•
1 and 3 = FM AN
•
2 = DIN AN
•
4 = FM CIO
•
5 = DIN CIO
•
6 = FM FB
•
7 = FM PA
1.7 Additional documentation
For information on transmitter configuration and use, and flowmeter troubleshooting, see LF-Series
Transmitters: Configuration and Use, LF-Series Transmitters with F
OUNDATION Fieldbus:
Configuration and Use, or LF-Series Transmitters with Profibus-PA: Configuration and Use.