Filter
Top Products
5. To reset Service Mode, press Esc (exit from the Disk Service Aids window).
Note: A disk must be in one of the states: Free Resource, New Resource or
Rejected, before it can be formatted or put into Service Mode. Array members,
System Resources and Hot-Spare disk drives cannot be formatted or put into
Service Mode.
To Set Service Mode With the RSM Configurator
1. Start the RSM Configurator (see “Accessing Service Aids from the RSM
Configurator” on page 30).
2. On the Adapter List page, select the required adapter.
3. On the Adapter View page, select the Physical View.
4. On the Physical View page, select the required disk drive.
5. On the Disk View page, click on the Service Mode button at the bottom of the
page.
Service Aids and Other Utilities 33