Filter
Top Products
MAP 2324 (continued)
074 (continued)
Go to Step 090 on page 2324-18 to add the disk drive to the group of disk drives that
are available for use by the RAID manager.
075
(From steps 070 and 073)
– Using the DOS Configurator, open the adapter list and select the appropriate
adapter.
– Select RAID 5 Arrays.
– Select each array type in turn.
ARE ANY ARRAYS LISTED WITH A STATUS OTHER THAN GOOD OR
REBUILDING?
Yes No
076
Go to Step 078.
077
Go to Step 001 on page 2324-2.
078
(From step 076)
– Using the SSA Configurator and Service Aids Utility, open the adapter list and select
the appropriate adapter.
– From the adapter menu select System Resources.
– Using the RSM configurator, go to the Logical View, then select RAIDx. All the
arrays of this type are shown.
– Select the arrays one at a time, and check whether any array has one or more
invalid data strips, one or more unbuilt parity strides, or one or more unbuilt
component strides.
DOES ANY ARRAY HAVE ONE OR MORE INVALID DATA STRIPS, ONE OR MORE
UNBUILT PARITY STRIDES, OR ONE OR MORE UNBUILT COMPONENT
STRIDES?
Yes No
079
Go to Step 081 on page 2324-17.
2324-16 IBM SerialRAID Adapter Maintenance Information