Filter
Top Products
MAP 2410 (continued)
006 (continued)
2. If you have just exchanged a disk drive or an SSA RAID Adapter, you must use
the configurator to restore the device to the system.
– If the original problem was not reported by a device, run diagnostics to each SSA
RAID Adapter in the system unit.
– Run the Fix procedure (see “Displaying SRNs” on page 3).
Note: If you do not run this service aid, the diagnostics might create an SRN for a
problem that has already been solved.
If you have a RAID array, and the problem remains, go to RAID Checkout at MAP
2324 step 069 on page 2324-15.
2410-2 IBM SerialRAID Adapter Maintenance Information