18
2
r PLOTTER MODEq COASTLINE DATA MANIPULATION
(2)-2 Ship-centering mode
| Manual operation (when the
cross hair cursor is active)
(2)-3 Displaying the latitude
and longitude lines
In ship-centering mode, the coastline image is automatically adjusted so that
the ship is always at the center of the screen.
The system defaults to the ship-centering mode.
If the ship mark is missing from the screen on which the cross hair cursor is active,
pressing the [SHIP] key allows the system to go to the ship-centering mode, where
the cross hair cursor disappears and the ship mark is centered on the screen.
A ROM card contains coastline data consisting of at least two screens. If a ROM
card (a NAVIONICS
®
Electronic Chart) is not inserted into the card slot, no coast-
line data is displayed.
The loxodromic latitude and longitude lines can be displayed on the coast-
line screen.
The color of these lines can be selected from seven options.
q Press the [MENU] key.
The Main Menu screen will appear.
w Select “Screen Setting” using the [UP] or [DOWN] key and press the [SET] key.
The Screen Setting screen will appear.
e Select “GRID” using the [UP] or [DOWN] key and press the [SET] key.
The selected menu item turns blue.
t Move to the color field using the [LEFT] key.
The color field is highlighted in yellow.
y Select the desired color from among available colors (White (WHIT), Yellow
(YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) and
press the [SET] key.
The color of the latitude/longitude lines changes to the selected option.
* If you do not want to display the latitude/longitude lines on the screen, select
“OFF” and press the [SET] key.
u When you finish setting, press the [MENU] key.
The previous screen appears.
5
¡Main Menu screen ¡Screen Setting screen
5
MAIN MENU
SCREEN SETTING
DISP MODE
BKG COLOR
LAND
SEA
NAME
D CON 5m
D CON 10m
D CON 20m
LIGHT
GRID
DISP MAPS
1
2
BLUE
YELL CSLN
BLUE
WHIT OFF
LBLU OFF
LBLU OFF
LBLU OFF
RED OFF
BLUE OFF
WHIT OFF
CLR
SOUNDER MENU
PLOTTER MENU
POSITIONING MENU
ALARM MENU
SCREEN SETTING
ENT
SET
CANC
SEL
80.0FT
CLR
ENT
SET
BACK
SEL
80.0FT