Filter
Top Products
40
15
r PLOTTER MODEq ALARM FUNCTION
(15)-2 Setting the alarm zone
To set the alarm zone, proceed as follows.
Perform steps q to e when simply turning on or off the alarm function.
q Press the [MENU] key.
The Main Menu screen will appear.
w Select “Alarm Menu” using the [UP] or [DOWN] key and press the [SET] key.
The Alarm Menu screen will appear.
e Select “Alarm Zone” using the [UP] or [DOWN] key and press the [SET] key.
The selected item turns blue.
* To cancel the alarm function, select “OFF” and press the [SET] key.
r Move to the alarm zone setting field using the [LEFT] or [RIGHT] key.
This field will be highlighted in yellow.
t Set a value into the alarm zone setting field using the [UP] or [DOWN] key and
press the [SET] key.
The setting will be saved.
y When you finish setting the alarm zone, press the [MENU] key.
You will return to the previous screen.
* To stop beep sounds temporarily, press the [CLR] key.
DEPTH 1FT OFF
SHALLOW 1FT OFF
FISH DEPTH 1FT OFF
WIDTH 1FT
ALARM ZONE 0.01NM OFF
ALARM MENU
80.0FT
5
CLR
SET
SET
CANC
H
0
10
20
30
40
ADJ SEL