Icom FP-561 Marine Radio User Manual


 
29
7
r PLOTTER MODEq TRACK MANIPULATION
(7)-1 Setting the track color
(7)-2 Changing the tracking
interval
There are seven user-selectable colors of the track.
Set the track color as follows.
q Press the [MENU] key.
The Main Menu screen will appear.
w Select Plotter Menu using the [UP] or [DOWN] key and press the [SET] key.
The Plotter Menu screen will appear.
e Select TRK COLOR (track color) using the [UP] or [DOWN] key and press the
[SET] key.
The selected item turns blue.
r Move to the color setting eld using the [LEFT] or [RIGHT] key.
The color eld is highlighted in yellow.
t Select the desired color from among seven colors (White (WHIT), Yellow (YELL),
Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) using the [UP] or
[DOWN] key and press the [SET] key.
The track color is set as you selected.
y When you nish setting the track color, press the [MENU] key.
You will return to the previous screen.
The system stores and plots the track consisting of up to 5,000 points
through which the ship passed.
If the number of the points exceeds 5,000, excess track data is deleted in chrono-
logical order.
The track data is updated at specied tracking intervals.
Note that longer tracking (track update) intervals allow the system to cover a longer
track, but may cause a lower resolution of the track image when zoomed in.
To change the tracking intervals, proceed as follows.
q Press the [MENU] key.
The Main Menu screen will appear.
w Select Plotter Menu using the [UP] or [DOWN] key and press the [SET] key.
The Plotter Menu screen will appear.
e Select TRK STEP (track step) using the [UP] or [DOWN] key and press the
[SET] key.
The selected item turns blue.
r Move to the setting eld using the [LEFT] or [RIGHT] key.
The setting eld is highlighted in yellow.
This eld contains three setting items; the time interval, the unit of time, and the
distance interval.
* The unit of distance depends on the setting on the Setting Menu screen.
t Enter the desired time interval and unit of time, or the distance interval into the
setting eld, and then press the [SET] key.
The change in tracking interval is saved.
y When you nish changing, press the [MENU] key.
You will return to the previous screen.
5
PLOTTER MENU
ROUTE ENTER/EDIT#
MARK ENTER/ERASE#
TRK COLOR
TRK STEP
TRK ERASE
HEADING
FRONT WIDE
OVER ZOOM
WHIT OFF
30S 1.00NM
ON OFF
ON OFF
ON OFF
80.0FT
CLR
SET
SET
CANC
ADJ
SEL
5
PLOTTER MENU
ROUTE ENTER/EDIT#
MARK ENTER/ERASE#
TRK COLOR
TRK STEP
TRK ERASE
HEADING
FRONT WIDE
OVER ZOOM
WHIT OFF
30S 1.00NM
ON OFF
ON OFF
ON OFF
CLR
SET
SET
CANC
ADJ
SEL
80.0FT