Filter
Top Products
69
6
INSTALLATION PROCEDURE
186 mm; 7
6
⁄16″
37.5 mm;1
15
⁄32″
103 mm;4″
125.65 mm;4
15
⁄16″
196 mm; 7
23
⁄32″ 125 mm;4
29
⁄32″
203 mm;8″
75 mm;
31
⁄32″
234.5 mm;9
7
⁄32″
178 mm;7″
234.5 mm;9
7
⁄32″
160 mm;6
5
⁄16″
91 mm;3
19
⁄32″
Tilting lever
Tilting
Removing the unit from the stand
The stand can also be attached to the top of the unit.
*Protrusions not included
MARINEPLOTTER/SOUNDER
fp-561
COMBINE
MARINEPLOTTER/SOUNDER
fp-561
COMBINE
ı Installing the main unit
Install the main unit as follows.
q Choose the installation position of the stand of the main unit.
w Mark center points through the four mounting holes of the stand and then drill a
hole of 5 mm in diameter at each of the marked points.
e Secure the stand with the self-tapping screws, flat washers and spring washers.
r Mount the main unit onto the stand and secure it with two mounting screws.
t Push the tilting lever down and adjust the angle of the unit as appropriate; then
return the lever to the original position.