Filter
Top Products
PowerLogic™ PM5100 series user guide Chapter 4—Front panel display and meter setup
© 2014 Schneider Electric All Rights Reserved 41
8. Press Yes to save your changes.
Alarms setup
An alarm is the meter’s means of notifying you when an alarm condition is detected,
such as an error or event that falls outside of normal operating conditions.
Related topics
• See “Alarms” on page 51 for a comprehensive description and detailed setup
instructions.
Remote Meter Setup
You can use ION Setup to remotely access the meter.
For more information on the ION setup configuration, please refer to ION Setup 3.0
Device configuration guide.
Select Dig Output None, Digital Output D1
Select which digital output the end of
demand interval pulse should be sent to.
Clock Sync Time 0 - 2359
Applies only to clock sync methods (these
synchronize the demand interval to the
meter’s internal clock).
Define what time of day you want to
synchronize the demand
Power or current demand setup parameters (continued)
Parameter Values Description