Filter
Top Products
© 2011 Schneider Electric. All Rights Reserved.
PowerLogic
TM
Series 800 Power Meter 63230-500-225A2
Chapter 3—Operation 3/2011
24
Accumulated Demand Readings Reset
Minimum/Maximum Values Reset
Display Mode Change
1. Press ###: to scroll through the Level 1 menu
until you see MAINT.
2. Press MAINT.
3. Press RESET.
4. Press
###: until DMD is visible.
5. Press DMD.
6. Enter the password (the default is 0000).
7. Press YES to reset the accumulated demand
readings and to return to the RESET MODE
screen.
2%3%4$%-!.$
./ 9%3
J6!2C
!-0$
J7C0J
0J
0J
PLSD110281
1. Press ###: to scroll through the Level 1 menu
until you see MAINT.
2. Press MAINT.
3. Press RESET.
4. Press
###: until MINMX is visible.
5. Press MINMX.
6. Enter the password (the default is 0000).
7. Press YES to reset the minimum/maximum
values and to return to the RESET MODE
screen.
2%3%4-).-!8
./ 9%3
!
PLSD110282
1. Press ###: to scroll through the Level 1 menu
until you see MAINT.
2. Press MAINT.
3. Press RESET.
4. Press
###: until MODE is visible.
5. Press MODE.
6. Press IEEE (default for Square D branded
power meters) or IEC (default for Schneider
Electric branded power meters) depending on
the operating mode you want to use.
NOTE: Resetting the mode changes the menu
labels, power factor conventions, and THD
calculations to match the standard mode selected.
To customize the mode changes, see the register
list.
2%3%4$%&!5,4
15)4 )%%% )%#
PLSD110283