Filter
Top Products
APIcom Instruction Manual Configuration
M100A
M200A
M200A
APICOM
M200A
APICOM
M200A
M100A
APICOM
M100A
APICOM
M100A
M300
APICOM
M300
Modem
Remote Site A
Remote Site B
APICOM
(local computer)
ModemModem
Modem
APICOM
Site B
APICOM
Modem
APICOM
Modem
APICOM
Site A
M700
APICOM
M700
Figure 2-4: Instruments, Sites, and Connectors
2.5.1. Configuring APIcom Instruments
APIcom maintains a list of all the instruments, which can be accessed by selecting Settings-
Instruments or clicking on the
toolbar button (refer to the following figure). This dialog is similar to
the connection dialog shown in Figure 2-2, except that the CONNECT button is not available and the
“Close on connect” option is grayed-out. Each instrument in the list represents one monitor or calibrator.
APIcom maintains separate properties for each instrument.
Figure 2-5: Instrument Dialog Box
2.5.1.1. To open the Instrument Properties dialog box
Step Action Comment
1.
Using the mouse, click on the desired
instrument
2.
Click on
or double-click on the
instrument
The Instrument Properties dialog box
appears (refer to Figure 2-6).
05499 Rev. A 2-6