Teledyne 5499 Marine Instruments User Manual


 
APIcom Instruction Manual iDAS Configuration and Data Access
Figure 4-4: iDAS Parameter Context Menu – Adding or Modifying a Parameter
To edit any existing parameter, click on Edit Parameter or
, which will bring up the following
dialog box.
Figure 4-5: iDAS Parameter Properties Dialog
The following table describes the parameter properties shown above.
Table 4-4: iDAS Parameter Properties
Property Description
Parameter This is the instrument-specific parameter to sample. The list of parameters differs
from instrument to instrument, and even from one instrument firmware version to
another.
Sample Mode This is the mode to sample the parameter with. Choices are AVG (average), INST
(instantaneous), MIN (minimum), or MAX (maximum), SDEV (standard deviation).
Precision This is the numeric precision to use when displaying a parameter value (range 0-4).
It is used to display the parameter values in the menus and in the RS-232 reports. It
is used by APIcom when viewing and saving downloaded data.
Store number of
samples in average
This option will store the number of samples in each concentration average (no
other parameters). This option is only available in newer instruments and will be
disabled if the instrument doesn’t support it.
4.5.6. Duplicating a Parameter
To duplicate a parameter and all its properties, simply select a parameter and click on or
right-click on a parameter and select Duplicate Parameter from the context menu. APIcom will create a
new parameter of the same type and add it to the end of the channel’s parameter list. The parameter
name can be identical to the original without conflict. This can be used to, e.g., sample one parameter
using the MIN, AVG, and MAX sampling modes.
4.5.7. Deleting a Parameter
To delete a parameter, simply select the parameter and click on . Alternatively, the user can
right-click on a parameter and select Delete Parameter from the context menu. In either case, APIcom
prompts to confirm the deletion. This prompt can be disabled in the Settings-Options menu.
05499 Rev. A 4-8