xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show traffic control
traffic control settings. This is specified by listing the lowest switch
number and the beginning port number on that switch, separated
by a colon. Then the highest switch number, and the highest port
number of the range (also separated by a colon) are specified.
The beginning and end of the port list range are separated by a
dash. For example, 1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4 − in numerical order.
Restrictions None.
Example usage:
To display traffic control setting:
DES-6500:4#show traffic control 1:1-1:5
Command: show traffic control 1:1-1:5
Traffic Storm Control Trap: [Occurred]
Port Thres Broadcast Multicast DLF Action Count Time Shutdown
hold Storm Storm Storm down Interval Forever
------ ------------- --------- --------- --------- -------- ---------- ---------- --------------
1:1 128 Disabled Disabled Disabled drop 0 5
1:2 128 Disabled Disabled Disabled drop 0 5
1:3 128 Disabled Disabled Disabled drop 0 5
1:4 128 Disabled Disabled Disabled drop 0 5
1:5 128 Disabled Disabled Disabled drop 0 5
Total Entries: 5
DES-6500:4#
101
