xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To display IGMP configurations:
DES-6500:4#show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask Ver- Query Maximum Robust- Last State
sion Response ness Member
Time Value Query
Interval
------------ --------------- ---- ------ -------- ------- ----- -------
System 10.90.90.90/8 1 125 10 2 1 Enabled
p1 20.1.1.1/8 1 125 10 2 1 Enabled
Total Entries: 2
DES-6500:4#
show igmp group
Purpose Used to display the Switch’s IGMP group table.
Syntax
show igmp group {group <group> | ipif <ipif_name 12>}
Description This command will display the IGMP group configuration.
Parameters
group <group> − The ID of the multicast group to be displayed.
<ipif_name 12> − The name of the IP interface of which the
IGMP group is a member.
Restrictions None.
Example Usage:
To display IGMP group table:
DES-6500:4#show igmp group
System 224.0.1.149 10.20.63.11 10.48.74.122 259
Command: show igmp group
Interface Multicast Group Last Reporter IP Querier IP Expire
-------------------- ------------------- --------------------- ------------------ -------------------
System 224.0.0.2 10.42.73.111 10.48.74.122 260
System 224.0.0.9 10.20.53.1 10.48.74.122 260
System 224.0.1.24 10.18.1.3 10.48.74.122 259
System 224.0.1.41 10.1.43.252 10.48.74.122 259
Total Entries: 5
DES-6500:4#
Example usage:
To view details regarding the IGMP group:
141
