A SERVICE OF

logo

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show ipif
Purpose Used to display the configuration of an IP interface on the Switch.
show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on
the Switch.
Parameters
<ipif_name 12> The name created for the IP interface to be
viewed.
Restrictions None.
Syntax
Description
Example usage:
To display IP interface settings.
DES-6500:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
Secondary : FALSE
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Enabled
Link Status : Link UP
Member Ports : 1:1-1:24
DES-6500:4#
NOTE: In the IP Interface Settings table shown above, the Secondary field
will have two displays. FALSE denotes that the IP interface is a primary IP
interface while TRUE denotes a secondary IP interface.
138