xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config authen_login
authenticated using the local user account database on the
Switch.
none – Adding this parameter will require no authentication
to access the Switch.
method_list_name – Enter a previously implemented method list
name defined by the user. The user may add one, or a combination of
up to four (4) of the following authentication methods to this method
list:
NOTE:
Entering none or local as an authentication
protocol will override any other authentication that
follows it on a method list or on the default method
list.
Restrictions Only administrator-level users can issue this command.
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a previously
configured RADIUS server.
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server
group previously configured on the Switch.
local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
none – Adding this parameter will require no authentication
to access the Switch.
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local, in
that order.
DES-6500:4#config authen_login method_list_name Trinity method tacacs
xtacacs local
Success.
Command: config authen_login method_list_name Trinity method tacacs
xtacacs local
DES-6500:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
157
