xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show ospf lsdb
Command: show ospf lsdb
Area LSDB Advertising Link State Cost Sequence
ID Type Router ID ID Number
----------- -------------- ------------------ ------------------ ------- -----------------
0.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000002
0.0.0.0 Summary 50.48.75.73 10.0.0.0/8 1 0x80000001
1.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000001
1.0.0.0 Summary 50.48.75.73 40.0.0.0/8 1 0x80000001
1.0.0.0 Summary 50.48.75.73 50.0.0.0/8 1 0x80000001
* ASExtLink 50.48.75.73 1.2.0.0/16 20 0x80000001
Total Entries: 5
DES-6500:4#
show ospf neighbor
Purpose Used to display the current OSPF neighbor router table.
Syntax
show ospf neighbor {<ipaddr>}
Description This command will display the current OSPF neighbor router table.
Parameters
<ipaddr> − The IP address of the neighbor router.
Restrictions None.
Usage Example
To display the current OSPF neighbor router table:
DES-6500:4#show ospf neighbor
Command: show ospf neighbor
IP Address of Router ID of Neighbor Neighbor
Neighbor Neighbor Priority State
--------------- -------------- -------- ------------
10.48.74.122 10.2.2.2 1 Initial
Total Entries: 1
DES-6500:4#
show ospf virtual_neighbor
Used to display the current OSPF virtual neighbor router table.
Syntax
show ospf virtual_neighbor {<area_id> <neighbor id>}
Description This command will display the current OSPF virtual neighbor
router table.
Purpose
314
