xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create snmp user
the agent.
•
<priv_key 32-32> - Enter an alphanumeric key string
of exactly 32 characters, in hex form, that will be
used to encrypt the contents of messages the host
sends to the agent.
none – Adding this parameter will add no encryption.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP user on the Switch:
DES-6500:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DES-6500:4#
delete snmp user
Purpose Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
Syntax
delete snmp user <SNMP_name 32>
Description
The delete snmp user command removes an SNMP user from
its SNMP group and then deletes the associated SNMP group.
Parameters
<SNMP_name 32> − An alphanumeric string of up to 32
characters that identifies the SNMP user that will be deleted.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-6500:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-6500:4#
show snmp user
34
