A SERVICE OF

logo

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
disable web
Purpose Used to disable the HTTP-based management software on the
Switch.
Syntax
disable web
Description This command disables the Web-based management software
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable HTTP:
DES-6500:4#disable web
Command: disable web
Success.
DES-6500:4#
save
Purpose Used to save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save
Description This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch’s memory each time the Switch is restarted.
Parameters
Entering just the save command will save only the Switch configuration
to NV-Ram.
Restrictions Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DES-6500:4#save
Command: save
Saving all configurations to NV-RAM… Done.
DES-6500:4#
NOTE: The DES-6500 does not support a change in box mode from Auto
to Static.
20