xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show vlan
Purpose Used to display the current VLAN configuration on the Switch.
Syntax
show vlan {<vlan_name 32>}
Description This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is
a member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to
display a summary of settings.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DES-6500:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : 1QVLAN Protocol ID :
UserDefinedPid : Advertisement : Enabled
Encap :
Member ports : 1:1-1:24,2:1-2:24
Static ports : 1:1-1:24,2:1-2:24
Untagged ports : 1:1-1:24,2:1-2:24
Forbidden ports :
VID : 2 VLAN Name : v1
VLAN TYPE : PROTOCOL Protocol ID : ip
UserDefinedPid : Advertisement : Disabled
Encap :
Member ports : 1:1-1:24,2:1-2:24
Static ports : 1:24,2:24
Untagged ports :
Forbidden ports :
Total Entries : 2
DES-6500:4#
125
