xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show authen_login
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique instead
of TACACS/XTACACS/TACACS+ and RADIUS, which are
local (authentication through the user account on the Switch)
and none (no authentication necessary to access any
function on the Switch).
Parameters default – Entering this parameter will display the default method list
for users logging on to the Switch.
method_list_name <string 15> – Enter an alphanumeric string of up
to 15 characters to define the given method list to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view all method list configurations:
DES-6500:4#show authen_login all
Command: show authen_login all
Method List Name Priority Method Name Comment
---------------- -------- --------------- ---------
Darren 1 tacacs+ Built-in Group
default 1 radius Built-in Group
GoHabs! 1 Newfie User-defined Group
Trinity 1 local Keyword
DES-6500:4#
create authen_enable method_list_name
Purpose Used to create a user-defined method list of authentication
methods for promoting normal user level privileges to Administrator
level privileges on the Switch.
Syntax
create authen_enable method_list_name <string 15>
Description This command is used to promote users with normal level
privileges to Administrator level privileges using authentication
methods on the Switch. Once a user acquires normal user level
privileges on the Switch, he or she must be authenticated by a
method on the Switch to gain administrator privileges on the Switch,
which is defined by the Administrator. A maximum of eight (8)
enable method lists can be implemented on the Switch.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters
to define the given enable method list to create.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a user-defined method list, named “Permit” for promoting user privileges to Administrator privileges:
159
