xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DES-6500:4#
delete authen_enable method_list_name
Purpose Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to
define the given enable method list to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the user-defined method list “Permit”:
DES-6500:4#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-6500:4#
show authen_enable
Purpose Used to display the method list of authentication methods for
promoting normal user level privileges to Administrator level privileges
on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges. The window will display the following
parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will be
queried for authentication when a user attempts to log on to
the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method. User-defined Group
162
