xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example Usage:
To delete route redistribution settings:
DES-6500:4#delete route redistribute dst rip src ospf
Command: delete route redistribute dst rip src ospf
Success.
DES-6500:4#
show route redistribute
Purpose Used to display the route redistribution on the Switch.
Syntax
show route redistribute {dst [rip | ospf] | src [rip | static | local
| ospf]}
Description Displays the current route redistribution settings on the Switch.
Parameters
src [rip | static | local | ospf] − Allows the selection of the routing
protocol on the source device. The user may choose between RIP,
static, local or OSPF.
dst [rip | ospf] − Allows the selection of the routing protocol on the
destination device. The user may choose between RIP and OSPF.
Restrictions None.
Example Usage:
To display route redistributions:
DES-6500:4#show route redistribute
Command: show route redistribute
STATIC RIP All 1
LOCAL OSPF Type-2 20
Total Entries : 2
Source Destination Type Metric
Protocol Protocol
-------- ------------ -------- --------
DES-6500:4#
276
