Filter
Top Products
ULTRANAVGPS SONAR
SPECIFICATIONS
UItraNavGPS Dimensions 5.875"H x 7.75"W x 3.875"D
Input Voltage
Current
10-15 vDO
500 ma
(lights off)
650 ma
(lights on)
192 kHz
600 watts
(peak-to-peak)
75 watts
(RMS)
3.1"H x 2.4"W
128 H x 80W
10,240
Total
ULTRANAVGPS GPS RECEIVER SPECIFICATIONS
GPS Module Dimensions 2.5"H x 4.1W x 7" D
Channels Five Parallel
Four continuous for
position
All
satellites
in
view tracked
Update
rate One second
Accuracy
Maximum
accuracy
achievable with
Standard
Positioning
Service
Position: 25 meters CEP
Velocity:
0.25 meters/sec RMS
Without SA PDOP.c6.0
NMEA
0183 SENTENCES
RMB Minimum Recommended
Sentence,
Part B
RMC Minimum Recommended
Sentence,
Part C
GLL Present Position
-
Latitude/Longitude
APA
Autopilot Steering
Data
DBK Water
Depth
MTW Water
Temperature (oC)
VHW
Speed Through
Water
(MPH)
VLW Distance Travelled/LOG
(NM)
fl,o
"\ Myl<ANDmtL/"
FOLJRRAES
I I-
— sa
rr
Pole Mount
First,
thread the
pole mounting adapter
onto the
mounting pole
or
ratchet base.
Align
the
pole mounting adapter
so the module will face
the bow of the boat. Install and
tighten
the set screw into the
pole
mounting adapter
and
tighten
it
securely.
This should
prevent
the GPS
module fitm
unscrewing
from the
pole.
Place the
gasket
onto the
pole
mounting
adapter.
Now attach the cable to the GPS module and
pass
the cable
through
the
gasket, pole mounting adapter,
and
pole.
Set the
GPS
module on
top
of the
pole mounting adapter
and
align
the four
threaded holes in the module with the holes in the
pole mounting
adapter. Using
the four stainless steel 5 mm screws and lock washers
supplied
with the
UltraNavGPS,
attach the
pole mounting adapter
to
the GPS module. This
completes
the
assembly.
BOW
TAsKET
I I
Transmitter
Frequency
Output
Power
(typical)
Size
Display
Pixels
__
( '•l
68 5
PDF compression, OCR, web-optimization with CVISION's PdfCompressor