Filter
Top Products
ix
Features
The 1800C-BB/1900C-BB series of radars and video plotters work within our new
product-network system called the “NavNet.” Each product has an IP address to
communicate with NavNet compatible products within the network, using TCP/IP protocol
through an Ethernet 10BASE-T network.
The main features are as follows:
•
The 1800C-BB/1900C-BB series of radars and video plotter consist of the following
models:
Model Output Range
Radar
Antenna
Marine Radar Model 1823C-BB 2.2 kW 24 rpm 1.5 ft, Radome
Marine Radar Model 1833C-BB 4 kW 36 nm 2 ft, Radome
Marine Radar Model 1933C-BB 4 kW 48 nm 3.5 ft, Open
Marine Radar Model 1943C-BB 6 kW 64 nm 4 ft, Open
Marine Radar Model 1953C-BB 12 kW 72 nm 4/6 ft, Open
Color Video Plotter
GD-1900C-BB
— — —
(These models have no monitor unit. The customer should prepare it.)
•
User friendly operation with combination of discrete keys, soft keys, alphanumeric keys
and trackball.
•
Accepts FURUNO and Nav-charts™ (NAVIONICS) charts, or C-MAP NT/NT+ charts
(C-MAP), depending on specification.
Note: All names mentioned above are registered trademarks of their respective
companies.
•
Fast chart redraw.
•
Built-in NavNet interface circuit board.
•
Video input (video recorder, CCD device, etc.) available with installation of optional PIP
Board.
•
Optional 12-channel GPS Receiver GP-310B or GP-320B. GP-320B mostly shares the
same features with the GP-310B and is additionally equipped with WAAS capability.
•
User programmable function keys.
•
Video sounder picture available with connection of the optional Network Sounder
ETR-6/10N or ETR-30N.
•
The optional facsimile receiver FAX-30 receives facsimile pictures and navtex messages
transmitted from facsimile and navtex stations.
offered by Busse-Yachtshop.de