Filter
Top Products
3. PLOTTER OPERATION
3-39
6. Choose how to record points for your route, by time, by range or manual
entry, by pressing A:BCKTRK TIME, B:BCKTRK TIME or C:MANUAL soft key
as appropriate. For manual entry, go to step 8. For BCKTRK TIME, BCKTRK
DIST one of the following displays appears.
00h01m
(When selecting BCKTRK TIME.)
00.1nm
(When selecting BCKTRK DIST.)
TIME INTERVAL DISTANCE INTERVAL
Displays for entry of time, distance interval
7. Enter interval desired with the trackball and the alphanumeric keys. Press the
A:START LOG and E:RETURN soft keys followed by the [MENU] key to
close the menu. At this moment, a voyage-based route will be created.
8. For manual entry of waypoints, do the following:
a) Press the [SAVE/MOB] key momentarily to enter a waypoint mark at own
ship position. A new waypoint is created under the youngest empty
waypoint number and added to the route. (At this time you may close the
SAVE ROUTE screen by pressing the E:RETURN soft key followed by
the [MENU] key.)
b) Repeat step a) as necessary. 35 waypoints may be entered.
To stop recording waypoints and save the route
You can stop recording waypoints and save the route as shown in the procedure
below. When 35 waypoints have been entered the message “Total 35 WPTS
have been already registered in the route. Stop creating voyage-based route.” is
displayed. In this case, creation of voyage-based route is stopped.
1. Press the [MENU] key followed by the C:WAYPOINTS/ROUTES and
D:CREATE VOYAGE-BASED ROUTE soft keys.
2. Press the A:FINISH LOG soft key to stop recording waypoints and save the
route.
3. Press the [MENU] key to close the menu.
offered by Busse-Yachtshop.de