Filter
Top Products
6. DATA TRANSFER
6-2
6.1.2 Saving data to a memory card
1. Insert a formatted memory card into the slot.
2. Press the [MENU] key followed by the E:SYSTEM CONFIGURATION,
D:DATA TRANSFER, A:SAVE/LOAD DATA and C:SAVE DATA TO
MEMORY CARD soft keys to show the SAVE DATA menu.
SAVE
DATA
▲
TRACKS OFF
MARKS & LINES OFF
WAYPOINTS & ROUTES OFF
SETTING DATA* OFF
* = Plotter data only
SAVEB
RETURNE
EDITA
FORMATD
Save data menu
3. Use the trackball to select item to save.
4. Press the A:EDIT soft key.
5. Use the trackball to select ON.
6. Press the C:ENTER soft key.
7. Repeat steps 3 to 6 to choose other data to save if desired.
8. Press the B:SAVE soft key, then press the [ENTER] knob. The message
“NOW SAVING DATA TO MEMORY CARD. DO NOT TURN OFF DISPLAY
UNIT UNTIL COMPLETED.” appears.
When saving is completed, “COMPLETED SAVING DATA. PUSH ENTER KNOB
TO CONTINUE.” appears. Push the [ENTER] knob to continue.
offered by Busse-Yachtshop.de