Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-2
Contents of general setup menu
Item Description Settings
Key Beep Turns key beep on/off. On, Off
Language Chooses menu language. English, French, German, Italian, Portuguese,
Spanish
Range Unit Chooses unit of range and speed
measurement.
nm, kt; km, km/h; sm, mph; nm & yd, kt; nm &
m, kt; km & m, km/h; sm & yd, mph
Temperature
Unit
Chooses unit of water temperature
measurement.
°C,°F
Depth Unit Chooses unit of depth measurement. ft, m, fa,
P/B (Passi/Braza)
Temperature
Source
Chooses source of water temperature
data.
ETR, NMEA. Select ETR to show water
temperature data fed from the network
sounder.
Depth Source Chooses source of depth data. ETR, NMEA. Select ETR to show depth data
fed from the network sounder.
Reset Trip
Log
Resets distance run to zero. Yes, No
Speed
Source
Chooses source of speed data. ETR, NMEA
Lat/Lon
Display
Chooses how many digits (or seconds)
to display after decimal point in latitude
and longitude position.
DD°MM.MM’, DD°MM.MMM’,
DD°MM.MMMM’, DD°MM’SS.S”
TD Display Chooses TD type. Loran C, Decca
Speed Chooses speed format to display. SOG (Speed over ground), STW (Speed
through water)
Position
Display
Chooses position display format. LAT/LON, TD
Time Display Chooses time notation. 12 hours, 24 hours
Range &
Bearing
Mode
Chooses how to calculate range and
bearing.
Rhumb Line: Straight line drawn between two
points on a nautical chart.
Great Circle: Shortest course between two
points on the surface of the earth.
Bearing
Readout
Chooses bearing display format for
course, course over ground and cursor
bearing.
True, Magnetic
Magnetic
Variation
The magnetic variations for all areas of
the earth are preprogrammed into this
unit. The preprogrammed variation is
accurate for most instances, however
you may wish to manually enter a
variation. For manual input, select
Manual, hit the A:EDIT soft key, enter
value, then hit the C:ENTER soft key to
set. “AUTO” requires position data.
Auto, Manual
offered by Busse-Yachtshop.de