Filter
Top Products
7. MAINTENANCE, TROUBLESHOOTING
7-8
Processor unit test
Press the A:PROCESSOR UNIT TEST soft key at the MEMORY I/O TEST
menu to test the processor unit. The equipment displays program version
number and checks devices. Results for device checks are shown as OK or NG
(No Good). For any NG, request service. A test connector is required to check
ports. “ - - ” shown when no test connector is connected. Chart number shown
when chart is inserted. Press the E:RETURN soft key to return the MEMORY I/O
TEST menu.
XX.XX* = Program Version No.
XX.XX* = Program Version No.
Model 1800-BB/1900-BB series GD-1900C-BB
* = For FURUNO, NAVIONICS model. 1950010 XXX for C-MAP model.
Program No. 1950011 XX.XX*
ROM1, 2 : OK
ROM3 : OK
ROM4 : OK
SDRAM : OK
SRAM : OK
INT. BATTERY : OK
PORT
NMEA IN/OUT 1 : - -
NMEA IN/OUT 2 : - -
RCU : OK
HEADING : 352.2
°
NETWORK : - -
CARD SLOT :
CHART NUMBER:
HEADING PULSE : OK
BEARING PULSE : OK (XX.Xrpm)
TOTAL ON TIME : 000000.0 h
TOTAL TX TIME : 000000.0 h
Machine Status +130
Program No. 1950011 XX.XX*
ROM1, 2 : OK
ROM3 : OK
ROM4 : OKS
SDRAM : OK
SRAM : OK
INTERNAL
BATTERY : OK
PORT
NMEA IN/OUT 1 : - -
NMEA IN/OUT 2 : - -
RCU : OK
HEADING : 352.2
°
NETWORK : - -
CHART NUMBER:
Machine Status +130
No results appear when
"sub" radar selected as
radar source.
Processor unit test results
GPS sensor test (Requires GPS Receiver GP-310B/320B)
Press the B:GPS SENSOR TEST soft key at the MEMORY I/O TEST menu to
test the GPS Receiver GP-310B/320B. The equipment displays GPS receiver
program version number, and checks the GPS unit for proper operation,
displaying OK or NG (No Good) as the result. For NG, request service. Press the
E:RETURN soft key to return the MEMORY I/O TEST menu.
*: This is for GPS-310B,
"48502380XX" appears for GPS-320B.
XX = Program Version No.
PROGRAM No. *48502180XX
GPS UNIT : OK
Machine Status +115
GPS receiver test results
offered by Busse-Yachtshop.de