Filter
Top Products
3. PLOTTER OPERATION
3-42
9. Use the trackball to select the waypoint you want to insert. (You can switch
between the local list and alphanumeric list by using the C:LOCAL LIST and
D:ALPHA LIST soft keys.)
10. Press the A:SELECT WPT or A:CHANGE WPT soft key, whichever is
displayed.
11. Press the [MENU] key to close the menu.
Inserting a waypoint from the plotter display
Inserting a waypoint before first waypoint or after last waypoint in a route
1. Press the [MENU] key to open the menu.
2. Press the C:WAYPOINTS/ROUTES soft key.
3. Press the B:ROUTES soft key.
4. Use the trackball to select a route.
5. Press the C:EDIT ROUTE soft key.
6. Press the A:PLOT soft key to show the plotter screen.
7. Operate the trackball to place the cursor on the first (or last) waypoint of the
route. A flashing diamond appears over the waypoint when it is correctly
selected.
8. Press the C:ADD TO START soft key or the C:ADD TO END soft key
depending on the waypoint you selected at step 7.
9. Operate the trackball to place the cursor on an existing waypoint (C:ADD
WPT soft key appears) or new location (C:ADD NEW WP soft key appears).
10. Press the C:ADD WPT soft key (C:ADD NEW WP soft key).
11. Press the [MENU] key to close the menu.
Inserting a waypoint in an intermediate location on a route
1. Follow steps 1 through 6 in “Inserting a waypoint before the first or last
waypoint in a route.”
2. Operate the trackball to place the cursor on a line connecting waypoints. The
C:SPLIT LEG soft key appears and the line flashes when it is correctly
selected.
3. Press the C:SPLIT LEG soft key.
4. Move the cursor to a new location or select an existing waypoint, in which
case the C:INSERT WPT soft key replaces the C:INSERT NEW WP soft key.
5. Press the C:INSERT WPT soft key (C:INSERT NEW WP soft key).
6. Press the [MENU] key to close the menu.
offered by Busse-Yachtshop.de