Filter
Top Products
1. OPERATIONAL OVERVIEW
1-6
1.4 Adjusting Hue, Panel Illumination
You may select the colors for the radar, plotter and overlay displays, and adjust
the panel illumination as below.
1. Press the [POWER/TX] key momentarily. A set of soft keys appears.
BRIDGE
FISH
WP-002
34° 22. 3456'N 359.9°M TRIP NU
080° 22. 3456'E
19.9 kt 99.9 nm
BRILL
CONTST
12/
H-UP
3nm
LP
319. 9
°
M
359.9 ˚R
11.70
nm
+
Radar Display
Plotter Display
BRILL
CONTST
16.0nm
(Blank label of softkey is not used)
(Blank label of softkey is not used)
RETURNE
D
RADAR
STBY
HUEC
PANEL
BRILL
B
RETURNE
D
RADAR
STBY
HUEC
PANEL
BRILL
B
2. Press the C:HUE soft key to show the hue setting window.
HUE
▲
DAY
NIGHT
TWILIGHT
MANUAL SET
▼
Hue window
3. Operate the trackball to select hue desired, referring to the table below.
MANUAL SET follows the color settings on the CHART DETAILS menu for
the plotter and the RADAR DISPLAY SETUP menu for the radar.
Night Day Twilight
Characters Radar: Red
Plotter: White
Black Radar: Green
Plotter: Black
Radar ring Red Green* Green*
Radar echo Orange Red Yellow
Background Black White Blue
Landmass (plotter) Light-Yellow Yellow Light-Yellow
Note that colors are slightly different depending on monitor characteristics.
Note: When using the overlay screen, the own ship track will be hidden if the
radar background and own ship track are blue and the “MANUAL SET”
hue setting is used. In this case, set HUE to other position and then return
to “MANUAL” to show the own ship track in black.
* = Red on
C-MAP display.
offered by Busse-Yachtshop.de