Filter
Top Products
3. PLOTTER OPERATION
3-33
3.8.3 Erasing waypoints
Erasing a waypoint directly from the plotter display
1. Operate the trackball to place the cursor on the waypoint you want to erase.
A flashing diamond mark appears over the waypoint when the waypoint is
correctly selected.
2. Press the [CLEAR] key. You are asked if you are sure to erase the waypoint.
3. Push the [ENTER] knob. The waypoint is erased from the plotter screen and
the waypoint list.
Erasing a waypoint from the menu
1. Press the [MENU] key followed by the C:WAYPOINTS/ROUTES and
A:WAYPOINTS soft key to open the waypoint menu.
2. Press the C:WAYPOINT BY CURSOR soft key.
3. Operate the trackball to place the cursor on the waypoint which you want to
erase. A flashing diamond mark appears on the waypoint when it is correctly
selected.
4. Press the D:EDIT/MOVE soft key followed by the D:ERASE WPT soft key.
You are asked if you are sure to erase the waypoint.
5. Push the [ENTER] knob to erase the waypoint.
6. Press the [MENU] key to close the menu. The waypoint is erased from the
plotter screen and the waypoint list.
Erasing a waypoint from the waypoint list
1. Press the [MENU] key to open the menu.
2. Press the C:WAYPOINTS/ROUTES and A:WAYPOINTS soft keys.
3. Press the A:LOCAL LIST or B:ALPHANUMERIC LIST soft key.
4. Use the trackball to select the waypoint you want to erase.
5. Press the D:ERASE WPT soft key. You are asked if you are sure to erase
the waypoint.
6. Push the [ENTER] knob. The waypoint is erased from both the waypoint list
and the plotter screen (if it is currently displayed).
7. Press the [MENU] key to close the menu.
offered by Busse-Yachtshop.de