Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-21
NAV
SETUP
* For GPS receiver other
than GP-310B/320B.
POSITION SOURCE ALL
SPEED AVERAGING* 0060second(s)
LOCAL TIME OFFSET* +00:00
TEMP CALIBRATION +00.0
°
F
DEPTH CALIBRATION +00ft
Nav setup menu
RETURNE
EDITA
5.7 Navigator Setup
This section provides the information necessary for selecting the type of
navigator connected to your plotter.
5.7.1 Navigation data source
The NAV SETUP menu mainly
selects the source of nav data.
For GPS receiver other than the
GP-310B/320B, speed
averaging and local time offset
(to use local time) are also
available.
Press the [MENU] key followed
by the E:SYSTEM
CONFIGURATION, B:NAV
OPTION and A:NAV SOURCE
SETTINGS soft keys to display
this menu.
Contents of nav setup menu
Item Description Settings
Position
Source
Chooses source of position data.
FURUNO BB GPS: GPS
Receiver GP-310B/320B
GP: GPS navigator (via
NETWORK or NMEA port)
LC: Loran C navigator (via
NETWORK or NMEA port)
ALL: Multiple navaid connection
(via NETWORK or NMEA port)
Speed
Averaging
Calculation of ETA is based on average
ship’s speed over a given period. If the
period is too long or too short, calculation
error will result. Change this setting if
calculation error occurs. The default setting
is suitable for most conditions.
0-9999 seconds
Local Time
Offset
GPS uses UTC time. If you would rather use
local time, enter the time difference between
it and UTC. This setting is not necessary
when the time difference is entered at the
GPS navaid which is connected. Use the +
<- -> - soft key to switch from plus to minus
and vice versa.
-13:30 to +13:30 hours
Te m p
Calibration
Offsets NMEA water temperature data. -40°F to +40°F
Depth
Calibration
Offsets NMEA depth data. -15 to +90 ft
offered by Busse-Yachtshop.de