Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-6
PassageWay Service Provider
Requirements
The PassageWay Service Provider requires the hardware and software listed
below. Install the required hardware and software before installing the
PassageWay Service Provider software. Note that system performance may
be adversely affected by lower system speeds and lower memory capacities.
an IBM-PC compatible PC with the following hardware:
NOTE:
The PC hardware requirements for the operating system you are
using (for example, Windows 95) most likely will be greater than
the PC hardware requirements for the PassageWay Service
Provider.
an 80386 or higher processor
an available serial port
a minimum of 4 MB of RAM
a 3.5-inch, 1.44-MB, high-density diskette drive
a hard disk with at least 4 MB of space available
a VGA or better monitor