Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-28
28. Choose the OK button.
If you are using Windows 95, the Configuration Complete message
box appears. Proceed to Step 29.
If you are using Windows 3.1 or later, the Telephony Drivers dialog
box appears. Perform the following steps:
a. In the Telephony Drivers dialog box, choose the Close button.
b. In the Telephony window, choose the Close button.
The Configuration Complete message box appears. Proceed to
Step 29.
29. Choose the OK button.
The View README File dialog box appears. If you want to view the
Readme file now, make sure the check box is selected. (This check
box is selected by default.) If you do not want to view the Readme file
now, make sure the check box is not selected.
30. Choose the Finish button.
If the
Readme file
check box was selected, the Notepad window
appears, displaying the contents of the Readme file. Proceed to
Step 31.
If the
Readme file
check box was not selected, the About To Restart
Windows message box appears. Proceed to Step 32.
31. When you are finished reading the Readme file, select Exit from the
File menu to close the Notepad window.
NOTE:
If you have any other Notepad windows open, you must close
all of them now. The installation will not continue until all
Notepad windows are closed.
The About To Restart Windows message box appears.