Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-20
The PassageWay Configurator is a software application that enables
you to set up the PassageWay Service Provider. Until you set up the
PassageWay Service Provider, you will be unable to use any TAPI
applications.
Setting up the PassageWay Service Provider consists of specifying
the following information:
the COM port to which the PassageWay adapter is connected
the release of the MERLIN LEGEND system your company has (for
example, R6.1). To determine the release of your MERLIN LEGEND
system, press the Intercom button on your MLX telephone and then
press *05. The release number appears on the display of your
telephone.
the mode in which the MERLIN LEGEND system is operating (that
is, Hybrid/PBX mode or Key mode). To determine the operating
mode, check if you have an Intercom button or a System Access
(SA) button on your telephone. If you have an Intercom button, the
MERLIN LEGEND system is operating in Key mode. If you have a
System Access button, the MERLIN LEGEND system is operating in
Hybrid/PBX mode. If you are unsure, consult your MERLIN LEGEND
System Manager.
type of telephone you have
the location and telephone number of each outside line button on
your telephone
the location and telephone number of each System Access (SA)
button on your telephone. (SA buttons are only available when the
MERLIN LEGEND system is operating in Hybrid/PBX mode.)