Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-19
c. Perform one of the following steps:
If the Lucent PassageWay Service Provider is listed in the
Telephony Drivers dialog box, select it, and then choose the
Setup button.
If the Lucent PassageWay Service Provider is not listed in the
Telephony Drivers dialog box:
i. Choose the Add button.
The Add Driver dialog box appears.
ii. Select the Lucent PassageWay Service Provider, and
then choose the Add button.
The PassageWay Configurator is launched, and it displays the
Find PassageWay Link dialog box.
Figure 2-3. Find PassageWay Link Dialog Box