Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-29
32. Choose the OK button.
The Install dialog box appears.
33. Remove the diskette from the diskette drive, and choose the OK
button.
Depending on your version of Windows, either the system or Windows
restarts.
The PassageWay Service Provider is now installed.
If you need to modify any of the information for your telephone (for example,
lines are added to or removed from your telephone), run the PassageWay
Configurator. The PassageWay Configurator is located in the application
folder/program group that contains the PassageWay Service Provider. (The
default application folder is PassageWay for MERLIN LEGEND.)
NOTE:
If you experience any difficulties running telephony applications, ask
your MERLIN System Manager to check the administration of your
telephone and then run the PassageWay Configurator again to correct
any errors you may have made.