Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-27
21. Enter the telephone number for the outside line, and then choose the
OK button.
The button displays “LINE.”
22. Repeat Steps 19 through 21 for any other outside lines on your
telephone.
23. Depending on the mode in which your MERLIN LEGEND system is
operating (that is, Hybrid/PBX mode or Key mode), choose the
location of a System Access button or Intercom button on your
telephone.
A submenu appears.
24. Depending on your system, choose System Access or Intercom.
The Enter Number dialog box appears.
25. Enter the number for the System Access button or Intercom button,
and then choose the OK button.
The button displays the number you entered.
26. Repeat Steps 23 through 25 for any other System Access buttons or
Intercom buttons on your telephone.
27. When you are finished, choose the Continue button.
The PassageWay Configurator - Complete message box appears.