Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-9
Before You Begin
This section describes the information that is required to install and configure
the PassageWay Service Provider.
Before installing the PassageWay Service Provider, you must know the
following information:
the release of the MERLIN LEGEND system your company has (for
example, R6.1). To determine the release of your MERLIN LEGEND
system, press the Intercom button or System Access (SA) button on
your MLX telephone and then press *05. The release number appears
on the display of your telephone.
the mode in which the MERLIN LEGEND system is operating (that is,
Hybrid/PBX mode or Key mode). To determine the operating mode,
check if you have an Intercom button or a System Access (SA) button
on your telephone. If you have an Intercom button, the MERLIN
LEGEND system is operating in Key mode. If you have a System
Access button, the MERLIN LEGEND system is operating in
Hybrid/PBX mode. If you are unsure, consult your MERLIN LEGEND
System Manager.
the type of telephone you have
the location and telephone number of each outside line button on your
telephone
the location and telephone number of each System Access (SA) button
on your telephone. (System Access buttons are only available when the
MERLIN LEGEND system is operating in Hybrid/PBX mode.)