Filter
Top Products
Installing the PassageWay
Adapter with a Local Power
Supply
B
B-1
Overview
This appendix describes how to install the PassageWay adapter with a local
power supply. You must install a local power supply in the following situations:
You use a console and DSS configuration with the PassageWay
Service Provider.
You installed the PassageWay adapter, but the LED on the
PassageWay adapter is a color other than amber or green (including
no color).
To install a local power supply, you will need:
a 400B or 400B2 adapter
a D6AP cord
a power supply
Refer to Figure B-1 while installing the PassageWay adapter.
NOTE:
Do not install the PassageWay adapter while you are active on a call.