Filter
Top Products
DSM250 User’s Manual
Page 92 Revision 1.4.16a
• No Gauge – select this option if there is no boost pressure gauge present.
• YANMAR
Select the required option using the Scroll Up and Scroll Down keys followed by the Enter key.
6.11.3 Boost Pressure Sender Type
The EMS100 comes from the factory preprogrammed with the characteristics of boost pressure
senders for supported engines. If the engine to which you are connecting the EMS100 has a boost
pressure sender, you must select the correct type of boost pressure sender for this setting in order for
the data to be displayed correctly. Valid options are:
• Disabled – select this option if there is no boost pressure sender present.
• YANMAR
• YANMAR W/THRESHOLD
Select the required option using the Scroll Up and Scroll Down keys followed by the Enter key.
6.11.4 Boost Pressure Sender Offset
Often, the characteristics of individual boost pressure senders vary from their specified values. This
setting allows you to apply an offset to the resistance value of the boost pressure sender in order to
allow you to bring the digital value reported by the EMS100 into agreement with that displayed by the
analog gauge.
6.11.5 Drive Trim Gauge Type
The EMS100 comes from the factory preprogrammed with the characteristics of drive trim gauge
types for supported engines. If the EMS100 is used with an analog drive trim gauge, you must select
the correct type of gauge for this setting in order for the data to be displayed correctly. Valid options
are:
• No Gauge – select this option if there is no trim gauge present.
• YANMAR
Select the required option using the Scroll Up and Scroll Down keys followed by the Enter key.
6.11.6 Drive Trim Sender Type
The EMS100 comes from the factory preprogrammed with the characteristics of drive trim senders for
supported engines. If the engine to which you are connecting the EMS100 has a drive trim sender,
you must select the correct type of drive trim sender for this setting in order for the data to be
displayed correctly. Valid options are:
• Disabled – select this option if there is no drive trim sender present.
• YANMAR
• MERCURY
Select the required option using the Scroll Up and Scroll Down keys followed by the Enter key.