Filter
Top Products
DSM250 User’s Manual
Page 74 Revision 1.4.16a
The “Stat” column indicates whether the device is currently connected to the bus and is
responding to queries (“Online”), or has been disconnected from the bus, has lost power, or for
some other reason is not responding to queries (“Offline”).
The “Disp” column indicates whether data from that particular device is accepted for display by
the remote DSM200 (“On”) or that the remote DSM200 ignores data transmitted by this device
(“Off”). By scrolling to the device and pressing the Enter key ( ), you may then use the
Scroll Up ( ) and Scroll Down ( ) keys to toggle the “Display” status for this particular
device. Once you are satisfied with the state of the “Display” setting, press the Enter key ( )
to accept the setting.
The remote DSM200 will retain information on devices that have been removed from the bus or
powered down (“Offline”) so that when they are placed back on the bus, they will assume their prior
“Display” setting.