Filter
Top Products
Revision 1.4.16a Page 209
®®
The maximum number of switches/breakers you can have on a single screen is 16 (the “4 Quarters”
format, with all four windows set to use the “4 rows” or “2 rows, 2 column” switch/breaker
configurations.
In order to configure the individual switch/breaker controls, press the “Enter” key with the selected
type highlighted to display a menu with entries for each switch/breaker in the window being
configured, as shown in ? below.
Figure 250 – Selection of an Individual Switch/Breaker
Figure 251 below shows the configuration menu for each individual switch/breaker.
Figure 251 – Configuration of an Individual Switch/Breaker
Each switch/breaker has several configurable parameters:
• Color-Off – select the color to be displayed when the controlled load is in the OFF state. The
default color is gray.
• Color-On – select the color to be displayed when the controlled load is in the ON state. The
default color is green.